How to Reset Canon iP1980

1 . Orange 1x 4x blink inexperienced . ( specifically the way to handle this blink scan Open HERE )
2 . inexperienced flashes orange alternately over 7x ( Ink absorbent material Full ) ,
3 . Orange 8x ink tank full

• Here square measure the steps to Reset iP1980 :

1 . Driver should already be put in . If you\'ve got not got drivers click here .
2 . The printer should be service mode (temporary reset ) .

To activate the service mode :
Unplug the wattage
Press the ability ( on the printer )
Electric power plugs ( light-weight is inexperienced )
While pressing the ability press the button ( light-weight turns orange )
Remove the 2 ( the printer can die )
Press the ability button once more and like a shot disconnect . ( light-weight is inexperienced ) ( don\'t disconnect wattage )

3 . Run the final Service Tool . If you are doing not have, Download here

4 . Disconnect wattage , plug back in and switch ( initial printer / sick wait until the sunshine flashes . Done

• How to run a General Service Tool

1. Exctrak file you downloaded
2. Windows should 1024x768 resolution
3. Run the file \" GeneralTool.exe \"
4. Select the USB Port
5. Tick ​​Cleaning and Eeprom Clear
6. click the most
7. click Platen
8. Done Quit
9. Turn off the printer by pressing the ability .
10. Done , then you are trying to remain disconnect the ability cable and replugging the printer , then activate your printer.